What a day to start part 2!

[-Craig-]

I have a few updates to come. Flat out at work but will update very soon

[johnsb00]

Looking for clicking fingers emoji.

[-Craig-]

Looking for clicking fingers emoji.

A teaser

I still don't know how to read these things. My son reckons it is about 4800 gallons





The pond is built the filters are plumbed in and all that is left to be done is to decide on what we are going to finish the top of the pond with
Oh and the air bar fitted, we have dropped it in for now as am unsure where to put it yet but that is an easy one. Once it was filled we did have a quite serious leak around the skimmer which we believe was a silicon failure as the pond filled completely and went down over night.

I will post up more of the build pictures as soon as I get a bit of time as my workload in September is mental.

[GDL]

26 m3 is more like 5700 uk gallons

[-Craig-]

26 m3 is more like 5700 uk gallons

Thanks for that That's a lot more than I expected

[johnsb00]

Hang in a minute
Is the first picture the starting point before the fill?

[-Craig-]

Hang in a minute
Is the first picture the starting point before the fill?

Yes it is. I tried to reset the meter but got bored of standing there with a compressor trying to go back to zero.

[johnsb00]

48,067-26,000=22,067
That’s in metric
22,067/4.5 = 4,903.778 imperial gallon

[-Craig-]

48,067-26,000=22,067
That’s in metric
22,067/4.5 = 4,903.778 imperial gallon

Still very happy with that figure i Was hoping to make the 5000 mark but near enough not to worry about it

Thank you.

[johnsb00]

If you undermine the liner I’m sure it will stretch for the few extra gallon